Ash Veneer Edgebanding
By A Mystery Man Writer
Description
Ash hardwood veneer edgebanding. 10mil thick with two backing options, Hot-Melt Glue or Paper-Back. Cover any cheap plain wood to make it look like its made of solid ash hardwood.
Ash wood veneer edge banding Sold in three widths 7/8”, 1, and 2. Purchase by the 25 foot section or by the full roll. HM Glue full rolls are 250’. Full roll of paper back edgeband is 500’. For multiple units purchased, the longest possible continuous piece will be sent. If a specific length is required, please contact us. Felt/Paper Backer: This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. It is recommended to apply a thin layer of contact cement to both the surface being covered and the edgebanding. The contact cement should be tacky before applying edgebanding to surface, this should only take a few minutes. Gently press edgeband onto the surface and work out any air bubbles with gentle pressure. Full roll with this backer is 500’. Hot Melt Glue Backer: A high quality EVA hot melt adhesive is on the back. There is no additional adhesive needed with this glue. This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. Before applying hot iron, cover with cotton cloth. It is recommended to move the hot iron in a circular pattern until adhesive adheres to surface. Scorching will occur if hot iron is left too long in one spot. Full roll with this backer is 250’.
Ash wood veneer edge banding Sold in three widths 7/8”, 1, and 2. Purchase by the 25 foot section or by the full roll. HM Glue full rolls are 250’. Full roll of paper back edgeband is 500’. For multiple units purchased, the longest possible continuous piece will be sent. If a specific length is required, please contact us. Felt/Paper Backer: This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. It is recommended to apply a thin layer of contact cement to both the surface being covered and the edgebanding. The contact cement should be tacky before applying edgebanding to surface, this should only take a few minutes. Gently press edgeband onto the surface and work out any air bubbles with gentle pressure. Full roll with this backer is 500’. Hot Melt Glue Backer: A high quality EVA hot melt adhesive is on the back. There is no additional adhesive needed with this glue. This edgeband will adhere to most surfaces. Rough sanding is necessary on smooth surfaces before applying. Before applying hot iron, cover with cotton cloth. It is recommended to move the hot iron in a circular pattern until adhesive adheres to surface. Scorching will occur if hot iron is left too long in one spot. Full roll with this backer is 250’.
Brand: Red Oak wood veneer edgebanding hot melt adhesive Model: Wood veneer edge banding Oak Red thin fleece back
Red Oak Wood Veneer edgebanding 3.25 x 120'' with preglued Adhesive (3-1/4)
Ash Veneer Edgebanding
Veneer Edge Banding Rolls 4 Types of Wood Veneer Edge Banding
Edgebanding, Wood Veneer, PSA, PVC, Iron-On, Tools
Real Wood Edge Banding in Stock: Pre-Glued & Non-Glued in Maple, Walnut, Oak, Ebony, and More
BIRCH NON-GLUED WOOD EDGEBANDING (1 1/4 TO 2
Real Wood Edge Banding in Stock: Pre-Glued & Non-Glued in Maple, Walnut, Oak, Ebony, and More
Edgemate 4631046, 7/8 Fleece Back-Sanded Real Wood Veneer
Veneer Edge Banding Rolls 4 Types of Wood Veneer Edge Banding
Tasmanian Oak Veneer Edge Banding – Bord Products
Wood Veneer Edgebanding - Metro Hardwoods
Wood Veneer Edgebanding - Metro Hardwoods
Blond Ash
Ash Automatic 15/16-in 500-ft Roll - Auto Wood-Edgebanding
Random Match American Walnut Spliced Veneer Sheets 4' X 8' For Furniture Door Plywood From Shunfang - Jiashan Shunfang Woodworks Co., Ltd.
from
per adult (price varies by group size)
